0.37 9.4 1.03 26.3 0.62 15.7 0.090 2.29 maximum panel thickness 0.28 7.1 hex nut 7/16-32 un thread flat washer panel mount seal o-ring mating plug seal o-ring 0.65 16.5 center pin/jack size (see table) center pin sleeve sleeve shunt 0.440 0.002 11.18 0.05 recommended panel mtg hole schematic sleeve sleeve shunt center pin notes: 1. dimensions shown for reference only. 2. hex nut, flat washer, and panel o-ring supplied unassembled 3. material: housings, hex nut - copper alloy, nickel plated insulator housing - thermoplastic o-rings - neoprene rubber, lubricated with synthetic grease terminal insulators - phenolic flat washer - steel, nickel plated pin, spring, terminals - copper alloy, silver plated 4. this product is rohs compliant do not scale drawing revisions apvd by date eco number rev rev part no. name of sheet apvd chkd by date drawn scale first used on spec no. spec no. material finish unless otherwise specified temper lbs/m mult width size this drawing describes a design considered proprietary in nature, developed and manufactured by switchcraft inc. and is released on a confidential basis for identification purposes only. b a 26591 8/6/10 rs tjk * * * * * * * * * * 2:1 7/23/09 pnk rs 8/6/10 tjk 8/6/10 1 1 sealed power jacks solder lug, rohs l712as, L722AS a 1. all dimensions in inches - two place decimals 0.02 - three place decimals 0.005 solidworks cad file customer drawing
|